Close

SIMULATORS

  • Max speed: 500mm/s
  • Peak Pitch angle: 15 degrees
  • Peak Roll angle: 15 degrees
  • Max linear displacement: 200mm
  • Footprint: 1.2m x 0.8m
  • Space required: 1.5m x 1m
  • Chassis weight: 70kg 
  • Power requirements: 500W
  • Actuator type: Belt Drive
  • Motion Control: Insecta Tech
  • Interface: Ethernet 
  • Response time: < 5ms
  • Max load: 150kg
  • Target: Rally/GT/Track racing
  • Build time: 4 weeks
  • Price: $4299

Most suitable for the small home with high attention to detail on all components. Low on cost but big on performance, features and quality. The FireAnt2 is a modular 2-Axis Simulator, easily upgradable to the FIREANT4(4-Axis) or FIREANT5(4-Axis + traction loss)

  • Max speed: 500mm/s
  • Peak Pitch angle: 15 degrees
  • Peak Roll angle: 15 degrees
  • Max linear displacement: 200mm
  • Footprint: 1.4m x 0.8m
  • Space required: 1.7m x 1m
  • Chassis weight: 80kg 
  • Power requirements: 1000W
  • Actuator type: Belt Drive
  • Motion Control: Insecta Tech
  • Interface: Ethernet 
  • Response time: < 5ms
  • Max load: 150kg
  • Target: Rally/GT/Track racing
  • Build time: 5 weeks
  • Price: $7099

Most suitable for the small home with high attention to detail on all components. Low on cost but big on performance, features and quality. Redefining 4-Axis simulation.

  • Max speed: 800mm/s
  • Peak Pitch angle: 31 degrees
  • Peak Roll angle: 31 degrees
  • Peak Yaw angle: 40 degrees
  • Max linear displacement: 600mm
  • Footprint: 1.65m x 1.85m
  • Space required: 2.2m x 2.4m
  • Chassis weight: 200kg
  • Power requirements: 15ooW
  • Actuator type: Belt Drive
  • Motion Control: Insecta Tech
  • Interface: Ethernet 
  • Response time: < 10ms
  • Max load: 250kg
  • Target: Flight, Rally/GT/Track racing
  • Build time: 8 Weeks
  • Price: $10899

Designed as a low cost alternative to the DragonFly, the Locust6 is a 6-Axis motion simulator with the same performance as the DragonFly, however utilising a full sheet metal sandwich construction instead of the aluminium tube system on the DragonFly. This results in significant cost savings with the only difference being aesthetics. 

  • Max speed: 800mm/s
  • Peak Pitch angle: 31 degrees
  • Peak Roll angle: 31 degrees
  • Peak Yaw angle: 40 degrees
  • Max linear displacement: 600mm
  • Footprint: 1.65m x 1.85m
  • Space required: 2.2m x 2.4m
  • Chassis weight: 200kg
  • Power requirements: 15ooW
  • Actuator type: Belt Drive
  • Motion Control: Insecta Tech
  • Interface: Ethernet 
  • Response time: < 10ms
  • Max load: 250kg
  • Target: Flight, Rally/GT/Track racing
  • Build time: 12 weeks
  • Price: $14399

 

Beautifully engineered, suitable for the home with high attention to detail on all components. The DragonFly6 is our current top of the range 6-Axis simulator for those who can afford an extra premium.